 |
|||||||||||||||||||||||||||||||||||||
Warning: It is a must that power is removed from inverter to avoid electric shock. High voltage of up to 1KV is required to power the CCFL backlight NOTE : A more detailed tutorial with tips from the
Step 2: remove connector from inverter and remove tape that hold the wires and inverter to the base of frame.
Step 3:remove additional tape
Step 4: Remove Inverter Board from cradle
Step 6: perform step#5 on the other side
Step 7: remove metal from lower-section of LCD
Step 8: remove lock that fasten wires to the assembly
Step 9: loosen the wires from assembly
Step 10: carefully remove CCFL Bulb w/ cradle assembly
Step 11: unsolder connection from
both terminals and replace bulb Step 12: Retrace back until all screws are fastened to the LCD brackets. At this time you have to test if LCD is properly connected by inserting power plug in the DC powerjack and power up the machine. As soon as you get the proper video display then power down the machine and replace the LCD frame. NOTE : A more detailed tutorial with tips from the
Thank you and Good Luck!
Submit a Review...
|
|
||||||||||||||||||||||||||||||||||||
|
info@LaptopRepairGuru.com |
|||||||||||||||||||||||||||||||||||||
